AQM MODULAR 6814LPD DBL380VAC/3/50

The Sea Recovery Aqua Matic Modular Watermaker is engineered to be easier to use. Fully automatic with a Full Color LCD Touch Screen, and able to produce up to 1,800 GPD, this desalinator is designed to maximize the boaters comfort and convenience.

Reverse Osmosis Membrane Type:Selected High Rejection/High Yield aromatic tri-polyamid, thin film composite, spiral wound, single pass, high rejection reverse osmosis membrane element

Power Source:AC

Minimum Inlet Pressure Rating:1/2" MNPT (Male National Pipe Thread, Amer. Std)

Salinity Monitoring: Automatic electronic monitoring. Temperature compensated with the digital continuous readout. The salinity monitoring components of the system give a continuous TDS readout in ppm (parts per million), are temperature compensated, and of a fail safe design

Water Feed Temperature Range:Max. 122°F / 50°C, Min. 33°F / .5°C

Feed Water Flow Rate:4.5 gpm / 17 lpm (depending on system)

pH Range:3-11 (typical seawater pH is 8)

Operation Type:Seawater nominal 820 psi / 56.5 bar / 57.66 Kg/cm2

Height:17" / 421 mm

Length:46 15/16" / 1,192 mm

Performance:+-15% at 820 PSI / 57 BAR, 77°F / 25°C & 35,000 PPM TDS typical sea water

Pump Type:Exclusive high efficiency Booster Pump;Optional Patented High Pressure Quintiplex Radial Axial Plunger Pump is water lubricated, does not require oil changes and operates 8,000 hours between required maintenance

Filter Type:Sea Strainer with a cleanable Monel Mesh Screen filter, Charcoal Filter Assembly, Commercial Prefilter, and Oil Water Separato

Pressure Adjustment Control Type:Automatic

Salt Rejection:99.2, Average 99.4 %

Salinity Range:Designed for seawater use up to 50,000 PPM TDS (NaCl) (typical seawater salinity is 35,000 ppm)